Automatic Linear Vial

Discriptions

"GMP" High Speed Linear Vial Washing Machine is most ideal for Round Vial and finds wide application in PHARMACEUTICALS INDUSTRIES. The automatic loading arrangement facilities loading of vials on to SS wire mesh conveyor through feed conveyor or vials are pushed manually from feed table. This saves manpower as vials are feed into pockets automatically. The automatic unloading mechanism consists of unloading vial continues on to turn table (Optional)

Operation

Three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. as per the rinsing requirement of vial. All the pumps are made of SS and all the water contact parts are made of SS 316 on a heavy base of SS structure.

In tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. Approved materials only are used for construction, together with a careful choice of components, thereby taking in to consideration all aspects of sanitation and consequence complying with the pharmaceutical G.M.P. requirements.

The quality of rinsing is ensured through 3 sets of inner and 2 sets of outer nozzles accurately placed to direct the jet at center of the vial and the vial comes out with water totally drained with minimum droplets of water.

Technical Specifications

Model		GLVW-100	GLVW-150	GLVW-250
Out put / Hour*		6000 vials	9000 vials	12000 vials
No. of Pocket Across		10	12	20
Electrical Specifications**	Main Motor	1 HP / 415 Volts / 50 Hz
	Pump Two Nos.	1 HP x 2 = 2 HP / 415 Volts / 50 Hz
	Electrical Heater	3 Kw.
	Conveyor	0.5 HP / 415 Volts / 50 Hz
Tank Capacity		80 Ltrs. S.S. 316
Wash Cycle		3 Inner + 1 Outer + 1 Air
Cycle Timing		3.5 Second for each wash + 1.5 second for traveling.
Water / Air Consumptions		400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM

Salient Features